A Property With No One On Site Is Not Unoccupied. It Is Unprotected.
A construction site at midnight. A vacant commercial property between tenants. A residential development where handover has happened but occupation has not. These are not edge cases, they are the normal lifecycle of every property in India. And during every one of those periods, there is no staff to notice something is wrong, no one to call, and no one to respond. Pehraa monitors your property the moment it goes live, with IoT sensors that cover every entry point and a trained operator who responds to every alert within 60 seconds, regardless of whether anyone is physically present.
Vacant & Under-Construction Property Monitoring
Installation Fee Waived On Annual Plan
Get A Quote For Your Home
Request a personalized security assessment and a custom quote for your home.
//The Window Every Vacant Property Leaves Open
The Biggest Security Risk In Real Estate Is Not A Weak Lock. It Is Nobody Watching What Happens After Hours.
India recorded 1,07,573 burglaries in 2023, and commercial premises, godowns, and unoccupied buildings are explicitly included in that count. A vacant property offers something that an occupied one does not: time. No staff to raise an alarm. No neighbours paying attention. No one to call the authorities. The longer a property sits unmonitored, the longer that window stays open, for theft of materials, equipment, copper wiring, or anything else left on site.
Pehraa closes that window. IoT sensors at every access point trigger an alert the moment something moves that should not. A trained operator reviews it within 60 seconds, contacts your designated representative, and coordinates the response, whether that is a check-in call, a site visit, or authorities. Every alert is logged. Every incident is documented. Your property is covered whether it is vacant, under construction, or sitting between tenants.
₹0
Installation fee waived on annual subscription.
60 sec
Time from sensor trigger to operator response, even with zero staff on site
24/7
Monitoring coverage across nights, weekends, and every period when no one is present
01
Point of contact for every incident, every location, every time – Pehraa
//Protecting Vacant Properties, Construction Sites and Residential Developments
Alarm Monitoring For Every Stage Of A Property's Lifecycle.
A property between tenants, a construction site between shifts, a completed development between handover and occupation. Each of these is a period where the property exists, carries value, and has no one present to notice if something goes wrong. That is not a gap in your schedule. It is a gap in your protection, and it is open every night until it is closed.
Pehraa monitors your property from the moment sensors go live, regardless of whether anyone is physically on site. Every access point is covered. Every alert is reviewed by a trained operator within 60 seconds. Every incident is documented. Your property is protected through every period when no one else is watching it.
// Who We Protect
Every Type Of Property. Protected Through Every Stage Of Its Lifecycle.
Under-Construction Residential Projects
Site monitoring through every night and weekend the workforce is absent.
Vacant Commercial Properties
Continuous monitoring for commercial premises sitting empty between tenants.
Completed But Unoccupied Developments
Monitoring through the gap between project completion and occupation.
Builder Show Flats And Sales Offices
After-hours monitoring for furnished show properties and on-site sales offices.
Plotted Development Sites
Perimeter and access point monitoring for open land developments.
Industrial And Logistics Parks
Large-site monitoring for warehousing and industrial developments between tenants.
Managed Co-Working And Commercial Spaces
After-hours monitoring for flexible office premises with multiple tenants.
Gated Community Common Areas
Monitoring for clubhouses and amenity blocks between handover and full occupation.
What Happens When Security is Left to Chance?
01 – Response Lag
Without real-time monitoring, an incident is only discovered hours later. This delay makes asset recovery nearly impossible and leaves your institution vulnerable to repeat offenses.
02 – Compliance FailuresÂ
Non-functional cameras or gaps in recording history can lead to heavy regulatory fines and the loss of operating licenses during mandatory audits.
02 – Reputational Damage
A single high-profile breach can erode years of customer trust. In the financial world, the perception of being “unsafe” is as damaging as the theft itself.
//Common Gaps In Retail Security
Solving The Gaps That Leave Vacant And Under-Construction Properties Exposed.
Most property developers and real estate managers are aware of the risk to vacant and under-construction sites. The gap is not awareness. It is that standard security arrangements are designed for occupied premises. We assessed the most common failure points in property security and built our service to address each one.Â
No One On Site To Respond
A sensor that triggers on a vacant site at midnight alerts no one if there is no operator watching. Pehraa puts a trained operator on every alert within 60 seconds, regardless of whether anyone is physically present.
No Verified Incident Documentation
A theft or damage event at a construction site with no verified response record makes insurance claims and contractor liability disputes significantly harder to resolve. Pehraa logs every incident with a full timestamp.
Gaps Between Occupation Periods
The period between a tenant leaving and a new tenant arriving is one of the highest-risk windows a property faces. Pehraa monitoring continues through every gap in occupation without interruption.
Construction Phase Vulnerability
An active construction site during the day becomes an unattended site full of materials and equipment at night. Pehraa covers the site through every hour the workforce is not there.
No Fire Detection On Vacant Sites
Unoccupied buildings carry significant fire risk from electrical faults and unauthorised access. Pehraa deploys fire and smoke sensors alongside intrusion detection, covering both risk types from day one.
High Upfront Cost
Temporary security arrangements for vacant or construction-phase properties have traditionally involved significant setup cost. One installation fee to get started. Monthly and annual subscription plans available. Installation fee waived on annual subscription.
Unlike temporary security arrangements that depend on a guard being present, Pehraa keeps a trained operator connected to your property every hour it sits unoccupied.
Your construction site deserves more than a siren.
//What Pehraa Offers
Alarm Monitoring Built For Every Stage Of A Property's Lifecycle.
Vacant Property Monitoring
Every access point to a vacant property is monitored from the day sensors go live. Unauthorised entry triggers an immediate operator review and escalation to your designated contact, regardless of whether anyone is physically present on site.
Construction Site Monitoring
Every perimeter entry, site gate, and internal access zone is covered through every hour the workforce is not present. Materials, equipment, and the site itself are monitored continuously through the night and across weekends.
Fire And Smoke Detection
Unoccupied buildings carry significant fire risk from electrical faults. Pehraa deploys fire and smoke sensors alongside intrusion detection, covering both risk types from the day monitoring goes live.
Multi-Store Centralised Monitoring
Every store in your network is monitored under one account. One contact. One monthly subscription. Consistent after-hours coverage and incident documentation across every premises you operate.
Our monitoring runs through every hour your stores are closed without requiring anything from your team. Every alert, every response, and every incident record is handled by our operators so you can open the next morning knowing the night was covered.
//How Pehraa Helps With Insurance​
Vacant Properties Are High Risk To Insurers. A Monitored One Is A Different Conversation.
Insurers treat vacant and under-construction properties as elevated risk by default. No occupants. No staff. No one to notice or respond if something goes wrong. A Pehraa-monitored property changes that position. Every access point is covered. Every alert is responded to by a trained operator within 60 seconds. And every incident is logged with a complete timestamped record that demonstrates professional monitoring was active and functioning. For property developers and portfolio managers, that documentation supports insurance claims, contractor liability disputes, and any legal proceedings that follow an incident on site.
//What Our Customers Say
Real Experiences. Real Peace Of Mind.
From quick responses to dependable monitoring, our clients trust us to protect what matters most. Their experiences reflect what proactive alarm monitoring looks like in practice.
//How We Protect Your Premises
How Pehraa Monitors A Property When Nobody Is There To.
Vacant and under-construction properties share a common problem: they are valuable, they are exposed, and they are unattended for long stretches at a time. Standard alarm systems solve the detection part. Pehraa solves the response part. A trained operator is on every alert within 60 seconds, whether the site has ten people on it during the day or zero at night.
Sensor placement is assessed against the specific layout of your property. Perimeter entry points, internal access zones, electrical and fire risk areas, and any sections that carry particular value or vulnerability. Coverage is built around the property as it actually exists, not a standard residential or commercial template.
Covers Every Access Point Regardless Of Site Activity
Perimeter gates, site entrances, internal doors, and fire risk areas are all monitored continuously. Coverage does not depend on staff presence. It runs whether the site is active or empty.
Responds To Every Alert Within 60 Seconds
Every sensor trigger is reviewed by a trained operator the moment it occurs. There is no delay waiting for a staff member to notice. No morning discovery of what happened the night before.
Contacts Your Designated Representative Immediately
Once an alert is verified, your site manager, project lead, or designated contact is called within 60 seconds. The escalation chain continues until someone with authority to act is reached.
Documents Every Incident For Insurance And Legal Purposes
Every alert and response is logged with a full timestamp. Records are structured for insurance submissions, contractor liability disputes, and any legal proceedings that may follow an incident.z
Active From Day One, Regardless Of Occupancy
Monitoring begins the moment sensors are installed. Vacant, under construction, or between tenants — coverage does not wait for occupation.
Sixty-Second Response With Zero Staff On Site
Every alert reviewed by a trained operator within 60 seconds. Response time does not depend on anyone being physically present at the site.
Incident Documentation For Insurance And Legal Purposes
Every incident logged with a complete timestamped record. Ready for insurance claims, contractor disputes, and legal proceedings without reconstruction after the fact.
Coverage Across Every Property In Your Portfolio
Every site and vacant premises under one account and one monthly invoice. Consistent coverage across your entire portfolio.
One Installation. One Subscription.
One installation fee to get started. Monthly and annual subscription plans available. Installation fee waived on annual subscription.
//Why Pehraa
Most Monitoring Services Need Someone On Site To Work. Pehraa Does Not.
Most security services are designed for occupied premises. A building with staff, a home with residents, a shop with an owner. Pehraa is built for the periods in between. Vacant properties, construction sites between shifts, developments between handover and occupation. Every stage where a property has value but no one present to protect it.
//Stay Informed. Stay Secure
Expert Perspectives On Alarm Monitoring
- DIY
- Guides
- Latest Updates
- public
Got Questions? We've Got Answers.
Can Pehraa monitor a property that is completely vacant with no staff on site?
Yes. Pehraa is built specifically for this. Monitoring begins from the moment sensors are installed regardless of whether anyone is present. Every alert is reviewed by a trained operator within 60 seconds and escalated to your designated contact. Response does not depend on anyone being physically on site.
At what stage of a project should we get Pehraa installed?
Yes. Every property in your portfolio is monitored under one centralised account with one monthly invoice. Coverage is consistent across every site regardless of location. New properties can be added as your portfolio grows without a separate contract.
Can Pehraa monitor multiple properties across different cities under one account?
Yes. Every property in your portfolio is monitored under one centralised account with one monthly invoice. Coverage is consistent across every site regardless of location. New properties can be added as your portfolio grows without a separate contract.
Can the incident documentation support an insurance claim or contractor liability dispute?
Yes. Every incident is logged automatically with a complete timestamped record covering the sensor trigger, the operator response, and every escalation step. For vacant property claims and construction site disputes where establishing exactly what happened and when is critical, that record is already built before you need it.
What does it cost to get a vacant or under-construction property on Pehraa?
One installation fee applies to get started. Monthly and annual subscription plans are available. The installation fee is waived on the annual plan. Sensors, installation, maintenance, and 24/7 monitoring are all included. We begin with an assessment of your property to identify access points and recommend the right coverage for the site as it currently stands.